Installation Notes

Java 2 SDK, Standard Edition
Version 1.3.1
Microsoft Windows

System Requirements | Installation Instructions | Troubleshooting

The Java 2 SDK is intended for use on Microsoft Windows 95, 98 (1st or 2nd edition), NT 4.0 with Service Pack 5, ME, 2000 Professional, 2000 Server, 2000 Advanced Server, or XP operating systems running on Intel hardware.

A Pentium 166MHz or faster processor with at least 32 megabytes of physical RAM is required to run graphically based applications. Forty-eight megabytes of RAM is recommended for applets running within a browser using the Java Plug-in product. Running with less memory may cause disk swapping which has a severe effect on performance. Very large programs may require more RAM for adequate performance.

You should have 70 megabytes of free disk space before attempting to install the Java 2 SDK software. If you also want to install the documentation download bundle, you will need an additional 120 megabytes of free disk space.

In this procedure, you will run the self-installing executable to unpack and install the Java 2 SDK software bundle.

Note: After the Java 2 SDK software has been installed, you will be asked to reboot your system, which completes the registry modifications that you will need if you ever want to deinstall this product later. To continue using these instructions after rebooting, either print them now or use your Web browser's history function to get back to this page.

The installation procedure has the following steps:

1. Check the download file size
2. Run the Java 2 SDK installer
3. Delete the downloaded file(s) (Optional)
4. Update the PATH variable
5. Check the CLASSPATH variable
6. Start using the SDK tools!
7. Uninstalling the Java 2 SDK

If you have any difficulties, see the Troubleshooting section at the end of this document or use this link to report an installation problem.

       <version number>

      j2sdk-1_3_1_<version number>-windows-i586.exe

      j2sdk-1_3_1_01-windows-i586.exe

Before you download a file, notice that its byte size is provided on the download page. Once the download has completed, check that you have downloaded the full, uncorrupted software file.

The file j2sdk-1_3_1_<version number>-windows-i586.exe is the Java 2 SDK installer. If you downloaded it instead of running it directly from the web site, double-click on the installer's icon. Then follow the instructions the installer provides. When done with the installation, you can delete the download file to recover disk space.

Installed Directory Tree
The Java 2 SDK has the directory structure shown below.

jdk1.3.1_<version number> ____________________|___________________ | | | | | | | | | | | | | | bin lib | | demo | | | | LICENSE | | | | jre | | COPYRIGHT | | __|__ | README | include | | README.html include-old bin lib

If you get an error about not having enough disk space even though you clearly have enough, see the troubleshooting section below.

If you want to recover disk space, delete the file (or files) you originally downloaded.

You can run the Java 2 SDK without setting the PATH variable, or you can optionally set it as a convenience.

Should I set the PATH variable?
Set the PATH variable if you want to be able to conveniently run the Java 2 SDK executables (javac.exe, java.exe, javadoc.exe, etc.) from any directory without having to type the full path of the command. If you don't set the PATH variable, you need to specify the full path to the executable every time you run it, such as:

    C:> \jdk1.3.1_<version number>\bin\javac MyClass.java

It's useful to set the PATH permanently so it will persist after rebooting.

How do I set the PATH permanently?
To set the PATH permanently, add the full path of the jdk1.3.1_<version number>\bin directory to the PATH variable. Typically this full path looks something like C:\jdk1.3.1_<version number>\bin. Set the PATH as follows.

Microsoft Windows NT and 2000 - To set the PATH permanently:

1. Choose Settings, Control Panel, and select System. On Microsoft Windows NT, select the Environment tab; on Microsoft Windows 2000 select the Advanced tab. Look for "Path" in the User Variables and System Variables. If you're not sure where to add the path, add it to the right end of the "Path" in the User Variables. A typical value for PATH is:

        C:\jdk1.3.1_<version number>\bin 
   

   Capitalization doesn't matter. Click "Set", "OK" or "Apply".

   The PATH can be a series of directories separated by semi-colons (;). Microsoft Windows looks for programs in the PATH directories in order, from left to right. You should only have one bin directory for a Java SDK in the path at a time (those following the first are ignored), so if one is already present, you can update it to jdk1.3.1_<version number>.

2. The new path takes effect in each new Command Prompt window you open after setting the PATH variable.

Microsoft Windows 98 and 95 - To set the PATH permanently, open the AUTOEXEC.BAT file and add or change the PATH statement as follows:

1. Start the system editor. Choose "Start", "Run" and enter sysedit, then click OK. The system editor starts up with several windows showing. Go to the window that is displaying AUTOEXEC.BAT.

2. Look for the PATH statement. (If you don't have one, add one.) If you're not sure where to add the path, add it to the right end of the PATH. For example, in the following PATH statement, we have added the bin directory at the right end:

   PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\JDK1.3.1_<version number>\BIN 
   

   Capitalization doesn't matter. The PATH can be a series of directories separated by semi-colons (;). Microsoft Windows searches for programs in the PATH directories in order, from left to right. You should only have one bin directory for a Java SDK in the path at a time (those following the first are ignored), so if one is already present, you can update it to jdk1.3.1_<version number>.

3. To make the path take effect in the current Command Prompt window, execute the following:

         C:> c:\autoexec.bat
   

   To find out the current value of your PATH, to see if it took effect, at the command prompt, type:

         C:> path
   

Microsoft Windows ME - To set the PATH permanently:

From the start menu, choose programs, accessories, system tools, and system information. This brings up a window titled "Microsoft Help and Support". From here, choose the tools menu, then select the system configuration utility. Click the environment tab, select PATH and press the edit button. Now add the SDK to your path as described in step b above. After you've added the location of the SDK to your PATH, save the changes and reboot your machine when prompted.

Microsoft Windows XP - To set the PATH permanently:

From the start menu, open the Control Panel, and from there, double click the System icon to open the System Control panel. If the System icon is not visible, first click on the "Switch to Classic View" button.

In the System control panel, select the Advanced tab, and then click the "Environment Variables" button. This will bring up a window in which you can edit system variables, including the PATH variable. After you've added the location of the SDK to your PATH, save the changes and reboot your machine when prompted. In order to be recognized on some systems, the addition may need to be added at the beginning of the variable list.

5. Check the CLASSPATH variable

The CLASSPATH variable is one way to tell applications written in the Java programming language (including the Java 2 SDK utilities) where to look for user classes (classes that you develop). (The -classpath command-line switch is the preferred way.) If your machine does not have the CLASSPATH variable set, you can ignore the rest of this step.

To check the setting, run the set command from the DOS prompt (From the start menu, choose Command Prompt.):

  C:> set

If CLASSPATH does not appear in the list of settings, it is not set. If your CLASSPATH variable is set to some value, you may want to clean up your CLASSPATH settings, so read on.

Should I modify the CLASSPATH variable?
The Java 2 SDK will work fine even if CLASSPATH is set for an earlier version of the SDK software, as long as it contains the current directory ".". However, if your CLASSPATH contains classes.zip (which was only in JDK 1.0.x and JDK 1.1.x), and you don't plan to continue using those earlier versions, you can remove that setting from the CLASSPATH now. In any case, if CLASSPATH is set, it should include the current directory -- this makes it possible to compile and then run classes in the current directory.

How do I modify the CLASSPATH?
Use the same procedure you used for the PATH variable in the previous step and either:

• Remove the CLASSPATH environment variable entirely.
  With Java 2 SDK, the default value is ".", the current directory. To include any user classes, use the -classpath command line switch instead with java, javac, javadoc and other tools. This is the recommended approach because it doesn't force one CLASSPATH for all applications.
  -OR-
• If you have applications that require CLASSPATH be set, keep those required user classes in CLASSPATH and include the current directory "." If you're no longer using JDK 1.1.x, remove classes.zip.

For more information, see Setting the class path.

6. Start using the Java 2 SDK!

Your computer system should now be ready to use the Java 2 SDK. In this step, you'll run some simple commands to make sure it is working properly.

If you are new to developing and running programs in the Java programming language, see The Java Tutorial online for some guidance. Note especially the tutorial trails under the heading Trails Covering the Basics.

You can also download the Java 2 SDK documentation from the Java 2 SDK download page..

7. Uninstalling the Java 2 SDK

If you should ever want to uninstall the Java 2 SDK, go to the Start menu and select Settings, then select Control Panel. In the Control Panel, open the Add/Remove Programs utility. You will be presented with a list of software that you can uninstall. Simply choose the Java 2 SDK from the list and click the "Add/Remove..." button.

Below are some tips for working around problems that are sometimes seen during or following an installation. For more troubleshooting information, see the Java FAQ.

• "Damaged" ActiveX Control file

  When you install version 1.3.1_<version number> of the Java Runtime Environment, the ActiveX Control file at C:\Winnt\Downloaded Program Files\Java Runtime Environment 1.3.1_<version number> will have a status of "Damaged." This is merely a cosmetic issue, and the "Damaged" status should have no adverse affect in any situation.

  Nevertheless, there is a workaround if for some reason you cannot have a status of damaged. Go to "Start -> Run" and type in "regedit". From the regedit windows, navigate to the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Code Store Database\Distribution Units\8AD9C840-044E-11D1-B3E9-00805F499D93\DownloadInformation". Double-click on the INF string and delete the highlighted string under "Value data". The ActiveX Control file will have a status of "Installed."

• Installer says you don't have enough disk space, even though you have more than 4GB free space available

  This problem can occur if the free space on your disk is in the narrow range [4GB, 4GB + required space -1]. To workaround this problem, create a temporary file (or files) that take up enough disk space to make the free space less than 4GB, then proceed with the installation. After the installation is completed, you may delete the temporary file(s).

  A similar problem may occur with larger amounts of free disk space. See bug report 4406594.

  Another workaround for these types of problems is the use WinZip to extract the contents of the j2sdk-1_3_1_<version number>-windows-i586.exe file, and then run the setup.exe executable from the directory that is created by the extraction.

  These types of problems should not exist with releases with version number 1.3.1_03 or later.

• If you see the following error message on Microsoft Windows 2000,

     config.nt. The system file is not suitable for running MS-DOS 
     and Microsoft Windows Applications.
  

  it indicates a problem with the %SystemRoot%\System32\COMMAND.COM file that has been seen on some installations of Microsoft Windows 2000. If you encounter this error message when you try to launch the installer, consult the Microsoft web site at

     http://support.microsoft.com/support/kb/articles/Q142/2/71.asp
  

  for information about resolving the problem.

• If you see the following error message

     corrupt cabinet file
  

  then the file you have downloaded is corrupted. (A cabinet file contains compressed application, data, resource and DLL files.) Check its file size against the expected file size listed in these instructions. If they don't match, try downloading the bundle again.

• If you see the following error message

     net.socketException: errno = 10047
  

  -or-

     Unsupported version of Microsoft Windows Socket API
  

  check which TCP/IP drivers you have installed. The AppletViewer supports only the Microsoft TCP/IP drivers included with Microsoft Windows 95. If you are using third-party drivers (e.g., Trumpet Winsock), you'll need to change over to the native Microsoft TCP/IP drivers if you want to load applets over the network.

• If you see the following error message

     System Error during Decompression
  

  then you might not have enough space on the disk that contains your TEMP directory.

• If you see the following error message

     This program cannot be run in DOS mode.
  

  then do the following:
  1. Open the MS-DOS shell (Windows/Start/Programs/MS-DOS Prompt)
     
  2. Right-click on the title bar
     
  3. Select Properties
  4. Choose the Program tab
  5. Push the Advanced button
  6. Make sure the item "Prevent MS-DOS-based programs from detecting Windows" is unchecked
  7. Select OK
  8. Select OK again
  9. Exit the MS-DOS shell
  10. Restart your computer.

• If the AppletViewer does not load applets
  then you might try the following:
  1. set HOMEDRIVE=c:
     set HOMEPATH=\
     and restart the AppletViewer (in the same Command Prompt window)
  2. set HOME=c:\
     and restart the AppletViewer (in the same Command Prompt window)

  If none of these work, try:

      java -verbose sun.applet.AppletViewer
  

  This lists the classes that are being loaded. From this output, you can determine which class the AppletViewer is trying to load and where it's trying to load it from. Check to make sure that the class exists and is not corrupted in some way.

• Appletviewer locks up
  This happens with NT Workstation 4.0, update 3, where the DISPLAY is configured for "true color". The appletviewer (and perhaps other entities) will lock up by running and then freezing the system consuming 100% CPU.
  To "test" this run the "java -verbose sun.applet.AppletView" and notice that it locks up when it tries to run the MTookit.class.
• Winsock Issues
  The Java 2 SDK does not include Microsoft Winsock 2.0. It is extremely likely that your system already has Winsock 2.0. Microsoft Windows NT 4.0, ME, 2000, and 98 come with Winsock 2.0. Microsoft Windows 95 comes with Winsock 1.1 or 1.2, but most Microsoft Windows 95 systems have been upgraded to Winsock 2.0 by now.

  To check which version of Winsock you have, search for "winsock.dll". Then choose "Properties" from the File menu and click the Version tab.

  You can download the Winsock 2.0 from this address:

  http://www.microsoft.com/windows95/downloads/
  contents/wuadmintools/s_wunetworkingtools/w95sockets2/

  The following URL contains information about how to determine if the Winsock 2.0 components are installed on a Microsoft Windows 95 platform:

  http://support.microsoft.com/support/kb/articles/Q177/7/19.asp

• Creating Source Files in Notepad - In Microsoft Windows, when you create a new file in Microsoft Notepad and then save it for the first time, Notepad normally adds the .txt extension to the filename. Therefore, a file you name Test.java is saved as Test.java.txt. It's important to note that you cannot see the .txt extension unless you turn on the viewing of file extensions (In Microsoft Windows Explorer, uncheck "Hide file extensions for known file types" under Folder Options). To prevent the .txt extension, enclose the filename in quotation marks, such as "Test.java", when typing it into the Save As dialog box.

  On the other hand, Microsoft WordPad does not add a file extension if you provide one -- you must save the file as "Text Document".