com.sun.jdi.request
Interface EventRequestManager

All Superinterfaces:

Mirror

public interface EventRequestManager
extends Mirror

Manages the creation and deletion of EventRequests. A single implementor of this interface exists in a particuar VM and is accessed through VirtualMachine.eventRequestManager()

Since:

1.3

See Also:

EventRequest, Event, BreakpointRequest, BreakpointEvent, VirtualMachine

Method Summary

List<AccessWatchpointRequest>	accessWatchpointRequests() Return an unmodifiable list of the enabled and disabled access watchpoint requests.
List<BreakpointRequest>	breakpointRequests() Return an unmodifiable list of the enabled and disabled breakpoint requests.
List<ClassPrepareRequest>	classPrepareRequests() Return an unmodifiable list of the enabled and disabled class prepare requests.
List<ClassUnloadRequest>	classUnloadRequests() Return an unmodifiable list of the enabled and disabled class unload requests.
AccessWatchpointRequest	createAccessWatchpointRequest(Field field) Creates a new disabled watchpoint which watches accesses to the specified field.
BreakpointRequest	createBreakpointRequest(Location location) Creates a new disabled BreakpointRequest.
ClassPrepareRequest	createClassPrepareRequest() Creates a new disabled ClassPrepareRequest.
ClassUnloadRequest	createClassUnloadRequest() Creates a new disabled ClassUnloadRequest.
ExceptionRequest	createExceptionRequest(ReferenceType refType, boolean notifyCaught, boolean notifyUncaught) Creates a new disabled ExceptionRequest.
MethodEntryRequest	createMethodEntryRequest() Creates a new disabled MethodEntryRequest.
MethodExitRequest	createMethodExitRequest() Creates a new disabled MethodExitRequest.
ModificationWatchpointRequest	createModificationWatchpointRequest(Field field) Creates a new disabled watchpoint which watches accesses to the specified field.
MonitorContendedEnteredRequest	createMonitorContendedEnteredRequest() Creates a new disabled MonitorContendedEnteredRequest.
MonitorContendedEnterRequest	createMonitorContendedEnterRequest() Creates a new disabled MonitorContendedEnterRequest.
MonitorWaitedRequest	createMonitorWaitedRequest() Creates a new disabled MonitorWaitedRequest.
MonitorWaitRequest	createMonitorWaitRequest() Creates a new disabled MonitorWaitRequest.
StepRequest	createStepRequest(ThreadReference thread, int size, int depth) Creates a new disabled StepRequest.
ThreadDeathRequest	createThreadDeathRequest() Creates a new disabled ThreadDeathRequest.
ThreadStartRequest	createThreadStartRequest() Creates a new disabled ThreadStartRequest.
VMDeathRequest	createVMDeathRequest() Creates a new disabled VMDeathRequest.
void	deleteAllBreakpoints() Remove all breakpoints managed by this EventRequestManager.
void	deleteEventRequest(EventRequest eventRequest) Removes an eventRequest.
void	deleteEventRequests(List<? extends EventRequest> eventRequests) Removes a list of EventRequests.
List<ExceptionRequest>	exceptionRequests() Return an unmodifiable list of the enabled and disabled exception requests.
List<MethodEntryRequest>	methodEntryRequests() Return an unmodifiable list of the enabled and disabled method entry requests.
List<MethodExitRequest>	methodExitRequests() Return an unmodifiable list of the enabled and disabled method exit requests.
List<ModificationWatchpointRequest>	modificationWatchpointRequests() Return an unmodifiable list of the enabled and disabled modification watchpoint requests.
List<MonitorContendedEnteredRequest>	monitorContendedEnteredRequests() Return an unmodifiable list of the enabled and disabled monitor contended entered requests.
List<MonitorContendedEnterRequest>	monitorContendedEnterRequests() Return an unmodifiable list of the enabled and disabled monitor contended enter requests.
List<MonitorWaitedRequest>	monitorWaitedRequests() Return an unmodifiable list of the enabled and disabled monitor waited requests.
List<MonitorWaitRequest>	monitorWaitRequests() Return an unmodifiable list of the enabled and disabled monitor wait requests.
List<StepRequest>	stepRequests() Return an unmodifiable list of the enabled and disabled step requests.
List<ThreadDeathRequest>	threadDeathRequests() Return an unmodifiable list of the enabled and disabled thread death requests.
List<ThreadStartRequest>	threadStartRequests() Return an unmodifiable list of the enabled and disabled thread start requests.
List<VMDeathRequest>	vmDeathRequests() Return an unmodifiable list of the enabled and disabled VM death requests.

Methods inherited from interface com.sun.jdi.Mirror

toString, virtualMachine

Method Detail

createClassPrepareRequest

ClassPrepareRequest createClassPrepareRequest()

Creates a new disabled ClassPrepareRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created ClassPrepareRequest

createClassUnloadRequest

ClassUnloadRequest createClassUnloadRequest()

Creates a new disabled ClassUnloadRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created ClassUnloadRequest

createThreadStartRequest

ThreadStartRequest createThreadStartRequest()

Creates a new disabled ThreadStartRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created ThreadStartRequest

createThreadDeathRequest

ThreadDeathRequest createThreadDeathRequest()

Creates a new disabled ThreadDeathRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created ThreadDeathRequest

createExceptionRequest

ExceptionRequest createExceptionRequest(ReferenceType refType,
                                        boolean notifyCaught,
                                        boolean notifyUncaught)

Creates a new disabled ExceptionRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

A specific exception type and its subclasses can be selected for exception events. Caught exceptions, uncaught exceptions, or both can be selected. Note, however, that at the time an exception is thrown, it is not always possible to determine whether it is truly caught. See ExceptionEvent.catchLocation() for details.

Parameters:

refType - If non-null, specifies that exceptions which are instances of refType will be reported. Note: this will include instances of sub-types. If null, all instances will be reported

notifyCaught - If true, caught exceptions will be reported.

notifyUncaught - If true, uncaught exceptions will be reported.

Returns:

the created ExceptionRequest

createMethodEntryRequest

MethodEntryRequest createMethodEntryRequest()

Creates a new disabled MethodEntryRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created MethodEntryRequest

createMethodExitRequest

MethodExitRequest createMethodExitRequest()

Creates a new disabled MethodExitRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

Returns:

the created MethodExitRequest

createMonitorContendedEnterRequest

MonitorContendedEnterRequest createMonitorContendedEnterRequest()

Creates a new disabled MonitorContendedEnterRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request. Not all target virtual machines support this operation. Use VirtualMachine.canRequestMonitorEvents() to determine if the operation is supported.

Returns:

the created MonitorContendedEnterRequest

Throws:

UnsupportedOperationException - if the target VM does not support this operation.

Since:

1.6

createMonitorContendedEnteredRequest

MonitorContendedEnteredRequest createMonitorContendedEnteredRequest()

Creates a new disabled MonitorContendedEnteredRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request. Not all target virtual machines support this operation. Use VirtualMachine.canRequestMonitorEvents() to determine if the operation is supported.

Returns:

the created MonitorContendedEnteredRequest

Throws:

UnsupportedOperationException - if the target VM does not support this operation.

Since:

1.6

createMonitorWaitRequest

MonitorWaitRequest createMonitorWaitRequest()

Creates a new disabled MonitorWaitRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request. Not all target virtual machines support this operation. Use VirtualMachine.canRequestMonitorEvents() to determine if the operation is supported.

Returns:

the created MonitorWaitRequest

Throws:

UnsupportedOperationException - if the target VM does not support this operation.

Since:

1.6

createMonitorWaitedRequest

MonitorWaitedRequest createMonitorWaitedRequest()

Creates a new disabled MonitorWaitedRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request. Not all target virtual machines support this operation. Use VirtualMachine.canRequestMonitorEvents() to determine if the operation is supported.

Returns:

the created MonitorWaitedRequest

Throws:

UnsupportedOperationException - if the target VM does not support this operation.

Since:

1.6

createStepRequest

StepRequest createStepRequest(ThreadReference thread,
                              int size,
                              int depth)

Creates a new disabled StepRequest. The new event request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

The returned request will control stepping only in the specified thread; all other threads will be unaffected. A sizevalue of StepRequest.STEP_MIN will generate a step event each time the code index changes. It represents the smallest step size available and often maps to the instruction level. A size value of StepRequest.STEP_LINE will generate a step event each time the source line changes unless line number information is not available, in which case a STEP_MIN will be done instead. For example, no line number information is available during the execution of a method that has been rendered obsolete by by a VirtualMachine.redefineClasses(java.util.Map) operation. A depth value of StepRequest.STEP_INTO will generate step events in any called methods. A depth value of StepRequest.STEP_OVER restricts step events to the current frame or caller frames. A depth value of StepRequest.STEP_OUT restricts step events to caller frames only. All depth restrictions are relative to the call stack immediately before the step takes place.

Only one pending step request is allowed per thread.

Note that a typical debugger will want to cancel stepping after the first step is detected. Thus a next line method would do the following:

     EventRequestManager mgr = myVM.eventRequestManager();
     StepRequest request = mgr.createStepRequest(myThread, 
                                                 StepRequest.STEP_LINE, 
                                                 StepRequest.STEP_OVER);
     request.addCountFilter(1);  // next step only
     request.enable();
     myVM.resume();
 

Parameters:

thread - the thread in which to step

depth - the step depth

size - the step size

Returns:

the created StepRequest

Throws:

DuplicateRequestException - if there is already a pending step request for the specified thread.

IllegalArgumentException - if the size or depth arguments contain illegal values.

createBreakpointRequest

BreakpointRequest createBreakpointRequest(Location location)

Creates a new disabled BreakpointRequest. The given Location must have a valid (that is, non-negative) code index. The new breakpoint is added to the list managed by this EventRequestManager. Multiple breakpoints at the same location are permitted. Use EventRequest.enable() to activate this event request.

Parameters:

location - the location of the new breakpoint.

Returns:

the created BreakpointRequest

Throws:

NativeMethodException - if location is within a native method.

createAccessWatchpointRequest

AccessWatchpointRequest createAccessWatchpointRequest(Field field)

Creates a new disabled watchpoint which watches accesses to the specified field. The new watchpoint is added to the list managed by this EventRequestManager. Multiple watchpoints on the same field are permitted. Use EventRequest.enable() to activate this event request.

Not all target virtual machines support this operation. Use VirtualMachine.canWatchFieldAccess() to determine if the operation is supported.

Parameters:

field - the field to watch

Returns:

the created watchpoint

Throws:

UnsupportedOperationException - if the target virtual machine does not support this operation.

createModificationWatchpointRequest

ModificationWatchpointRequest createModificationWatchpointRequest(Field field)

Creates a new disabled watchpoint which watches accesses to the specified field. The new watchpoint is added to the list managed by this EventRequestManager. Multiple watchpoints on the same field are permitted. Use EventRequest.enable() to activate this event request.

Not all target virtual machines support this operation. Use VirtualMachine.canWatchFieldModification() to determine if the operation is supported.

Parameters:

field - the field to watch

Returns:

the created watchpoint

Throws:

UnsupportedOperationException - if the target virtual machine does not support this operation.

createVMDeathRequest

VMDeathRequest createVMDeathRequest()

Creates a new disabled VMDeathRequest. The new request is added to the list managed by this EventRequestManager. Use EventRequest.enable() to activate this event request.

This request (if enabled) will cause a VMDeathEvent to be sent on termination of the target VM.

A VMDeathRequest with a suspend policy of SUSPEND_ALL can be used to assure processing of incoming SUSPEND_NONE or SUSPEND_EVENT_THREAD events before VM death. If all event processing is being done in the same thread as event sets are being read, enabling the request is all that is needed since the VM will be suspended until the EventSet containing the VMDeathEvent is resumed.

Not all target virtual machines support this operation. Use VirtualMachine.canRequestVMDeathEvent() to determine if the operation is supported.

Returns:

the created request

Throws:

UnsupportedOperationException - if the target VM does not support this operation.

Since:

1.4

deleteEventRequest

void deleteEventRequest(EventRequest eventRequest)

Removes an eventRequest. The eventRequest is disabled and the removed from the requests managed by this EventRequestManager. Once the eventRequest is deleted, no operations (for example, EventRequest.setEnabled(boolean)) are permitted - attempts to do so will generally cause an InvalidRequestStateException. No other eventRequests are effected.

Because this method changes the underlying lists of event requests, attempting to directly delete from a list returned by a request accessor (e.g. below):

   Iterator iter = requestManager.stepRequests().iterator();
   while (iter.hasNext()) {
      requestManager.deleteEventRequest(iter.next());
  }
 

may cause a ConcurrentModificationException. Instead use deleteEventRequests(List) or copy the list before iterating.

Parameters:

eventRequest - the eventRequest to remove

deleteEventRequests

void deleteEventRequests(List<? extends EventRequest> eventRequests)

Removes a list of EventRequests.

Parameters:

eventRequests - the list of eventRequests to remove

See Also:

deleteEventRequest(EventRequest)

deleteAllBreakpoints

void deleteAllBreakpoints()

Remove all breakpoints managed by this EventRequestManager.

See Also:

deleteEventRequest(EventRequest)

stepRequests

List<StepRequest> stepRequests()

Return an unmodifiable list of the enabled and disabled step requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all StepRequest objects.

classPrepareRequests

List<ClassPrepareRequest> classPrepareRequests()

Return an unmodifiable list of the enabled and disabled class prepare requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ClassPrepareRequest objects.

classUnloadRequests

List<ClassUnloadRequest> classUnloadRequests()

Return an unmodifiable list of the enabled and disabled class unload requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ClassUnloadRequest objects.

threadStartRequests

List<ThreadStartRequest> threadStartRequests()

Return an unmodifiable list of the enabled and disabled thread start requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ThreadStartRequest objects.

threadDeathRequests

List<ThreadDeathRequest> threadDeathRequests()

Return an unmodifiable list of the enabled and disabled thread death requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ThreadDeathRequest objects.

exceptionRequests

List<ExceptionRequest> exceptionRequests()

Return an unmodifiable list of the enabled and disabled exception requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ExceptionRequest objects.

breakpointRequests

List<BreakpointRequest> breakpointRequests()

Return an unmodifiable list of the enabled and disabled breakpoint requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all BreakpointRequest objects.

accessWatchpointRequests

List<AccessWatchpointRequest> accessWatchpointRequests()

Return an unmodifiable list of the enabled and disabled access watchpoint requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all AccessWatchpointRequest objects.

modificationWatchpointRequests

List<ModificationWatchpointRequest> modificationWatchpointRequests()

Return an unmodifiable list of the enabled and disabled modification watchpoint requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the all ModificationWatchpointRequest objects.

methodEntryRequests

List<MethodEntryRequest> methodEntryRequests()

Return an unmodifiable list of the enabled and disabled method entry requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MethodEntryRequest objects.

methodExitRequests

List<MethodExitRequest> methodExitRequests()

Return an unmodifiable list of the enabled and disabled method exit requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MethodExitRequest objects.

monitorContendedEnterRequests

List<MonitorContendedEnterRequest> monitorContendedEnterRequests()

Return an unmodifiable list of the enabled and disabled monitor contended enter requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MonitorContendedEnterRequest objects.

Since:

1.6

monitorContendedEnteredRequests

List<MonitorContendedEnteredRequest> monitorContendedEnteredRequests()

Return an unmodifiable list of the enabled and disabled monitor contended entered requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MonitorContendedEnteredRequest objects.

Since:

1.6

monitorWaitRequests

List<MonitorWaitRequest> monitorWaitRequests()

Return an unmodifiable list of the enabled and disabled monitor wait requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MonitorWaitRequest objects.

Since:

1.6

monitorWaitedRequests

List<MonitorWaitedRequest> monitorWaitedRequests()

Return an unmodifiable list of the enabled and disabled monitor waited requests. This list is a live view of these requests and thus changes as requests are added and deleted.

Returns:

the list of all MonitorWaitedRequest objects.

Since:

1.6

vmDeathRequests

List<VMDeathRequest> vmDeathRequests()

Return an unmodifiable list of the enabled and disabled VM death requests. This list is a live view of these requests and thus changes as requests are added and deleted. Note: the unsolicited VMDeathEvent does not have a corresponding request.

Returns:

the list of all VMDeathRequest objects.

Since:

1.4